Did you know that spreading baking soda between tiles can have a surprising effect? The results will surprise you, and you’ll always use baking soda to clean your joints. Here’s how!
Cleaning the space between tiles is a demanding and even difficult job, but leaving it as it is is not hygienic and also looks unsightly.
Floor grout is one of the essentials that must be cleaned by anyone who loves a perfectly clean home, and when it’s covered with white grout, it’s impossible to leave it dirty. In fact, the grout will darken, revealing dirt and obvious germs and bacteria that have accumulated between the tiles.
Whether it’s floors, bathroom or kitchen tiles, cleaning grout is a task that should be done regularly to keep it as clean and hygienic as possible.
But what can you do to avoid joint damage and achieve a flawless result? Professional products can sometimes contain substances that attack and damage the spaces between tiles. Therefore, it’s advisable to use natural products or ingredients you can easily find at home.
Among them, we find bicarbonate , a natural and degreasing ingredient that whitens joints and makes them look like new without altering them. Baking soda is useful for many jobs that need to be done around the house, but it can also be used for many other purposes, such as cleaning the sink and unclogging it .
Learn how to use baking soda on your sink and clean the spaces between tiles to loosen dirt and rid the spaces of germs and bacteria!
Clean the sink with baking soda
In this case, it’s usually enough to pour a handful of it into the sink , immediately add the vinegar, and the sink will be instantly free of clogs. But how do you adjust the dosage? Here’s how:
- One liter of water
- 100 g baking powder
- 100g salt
This mixture is great for cleaning sink drains and is truly effective. Boil a liter of water in a pot, then pour it into a bowl and add about 100 grams of baking soda and 100 grams of salt.
Mix the salt and baking soda solution thoroughly, pour it into the clogged sink drain , and immediately pour boiling water into it. Let it sit for a few minutes and repeat the process until the sink drain is clear.
Why spread baking soda between the tiles?
Using baking soda between tiles is an effective, time-honored remedy that guarantees flawless results. Cleaning the small spaces between tiles with this natural ingredient is a great idea, as it delivers very satisfying results, and you’ll notice the difference when you use it.
You can clean tile grout with baking soda as often as you like, instead of using bleach-based products, which can damage the tiles and also cause holes between the gaps. Below is how to use baking soda on tiles correctly!
How to use baking soda on tiles
Here’s what you need to get a flawless grout:
- 100 g baking powder
- 200 ml water
Mix the two ingredients and knead until a thick paste forms, which you can spread over the surface to be treated. Also, use a small brush to scrub the grout and remove any accumulated dirt.
Leave the mixture to work for at least 20 minutes to soften any remaining dirt, then continue rubbing for a few more minutes and finally dry the tiles with a damp, wrung-out microfiber cloth.
You can also use diluted baking soda. Simply dissolve 50 g of baking soda in 500 ml of water and pour the solution into a spray bottle. Spray the mixture onto the grout and let it sit for a few minutes, then scrub with a laundry brush and finally dry with a microfiber cloth.
